We are now offering our Stage 3 Performance Kit, which includes our Performance Series Bolt Shroud, Performance Series Picatinny Rail, Limbsaver Recoil Pad, Performance Series Bolt Handle, and Performance Series Bottom Metal for $299.00! These items are normally priced at $417.00!
Sales are subject to new sales and existing inventory and may sell out at any time.
MOUNTAIN TACTICAL® Gen2 Performance Series Bolt Shroud
The finest Tikka T3 Bolt Shroud on the market today received a facelift. We’ve seen bolt dimensions change slightly in last year, and have decided to redesign our bolt shroud to have a more snug fit. We’ve also changed the aesthetics of it for a new generation.
The development team was tasked with creating not only a more durable bolt shroud than the plastic factory part but to also add a level of increased precision that would allow the firearm to perform better than it does with the plastic shroud.
Mass was increased over threefold to give the firing pin assembly a more solid platform to operate from.
The outside diameter was matched to the inside diameter of the bolt race creating perfect alignment of the bolt to enhance concentricity of the cartridge to the chamber. In essence, the benefit is the same as having a three-lug bolt to ensure alignment to the axis of the bore.
All this and a profound aesthetic enhancement as well.
Like all MOUNTAIN TACTICAL® products, this Tikka T3 Bolt Shroud carries a lifetime warranty to ensure a lifetime of good service.
Proudly Made in Montana!
- Material – 6061-T6 Billet Aluminum
- Finish – Type III Mil-Spec Hard Anodized
- Weight – .7 ounces
MOUNTAIN TACTICAL® Gen2 Performance Series Picatinny Rail
The MOUNTAIN TACTICAL® is excited to offer our Performance Series Picatinny rails for the Tikka T3 available in both 0 and 20 MOA.
The primary advantage of the Performance Series Picatinny rail system is our proprietary utilization of Tikka’s recoil recess in the action. This recoil lug absorbs the shearing forces of the mount under recoil instead of the four tiny screws included in most other mounting systems.
These rails are full, MIL-STD 1913 spec rails machined to an amazing +/- .002″ tolerance. Machined from one piece of 6061 aluminum and MIL-STD Type 3 anodizing, these rails will give you a lifetime of service. Type 3 anodizing creates a hardened coating with a Rockwell Hardness value between 60 and 70. (Click here to learn more about MIL-STD Type 3 Anodizing)
Unlike standard Weaver-style rail mounts with limited contact with the scope rings, our full Picatinny rails make contact with the scope rings over the entire width of the mount. This eliminates potential damage that can occur under heavy recoil (see the picture of a T3 Standard Rail damaged by the recoil of a .270).
The MOUNTAIN TACTICAL® Performance Series rails for the Tikka T3 are the finest aluminum Tikka T3 mounts you will find anywhere.
Limbsaver Gen2 AirTech Recoil Pad
Custom Pre-fit Pads are easily installed after removal of the existing stock pad. These recoil pads offer innovative recoil reduction technology that absorbs recoil and vibration through a unique three-step process using a proprietary material NAVCOM. The superior Limbsaver recoil reduction system allows greater access to shooting sports. May require minor fitting on some models. Mounting screws not included. Choosing the right recoil pad can prove quite difficult considering there are a number of choices when it comes to style, size color, and texture.
Tikka T3/T3 Bolt handles
We are excited to announce the launch of the finest bolt handles available for the Tikka T3/T3x rifle line!
A bolt handle has been absent from our product lineup for a couple of years now. We ceased selling other manufacturers’ handles because quality control was always hit or miss with their products. The bolt handle is a critical component of the rifle system and is not something that should be taken lightly.
This is a product that we did not want to rush into manufacturing. We tested all the available bolt handles on the market we could get our hands on to determine what features would most benefit shooters when operating the rifle.
Additionally, we wanted a bolt handle that would not only perform under all shooting conditions but look aesthetically pleasing in the process.
The result is what you see here!
These mountain tactical bolt handles are designed to give you more control over your rifle.
The longer handle makes cycling the bolt easier allowing you to eject and chamber a round without taking your sights off your target.
A larger diameter bolt knob increases tactility making positive bolt manipulation while wearing gloves a more confident and safe action.
Of course, at the end of the day, they just look awesome!
Not sure which handle you want to choose? no problem! The austenitic stainless steel handle stem is threaded with an industry-standard 5/16-24 thread to accept other mountain tactical bolt knobs or other knobs from manufacturers such as badger ordnance, etc. You can switch out knobs with ease.
Additional bolt knobs are available.
Proudly made in Montana!
Handle stem material – stainless steel
Handle stem finish – mill finish
Bolt knobs – 6061-t6 billet aluminum
Bolt knob finish – type iii mil-spec hard anodized
Tikka T3/T3x Bottom metal
Things keep getting better and better! Our Gen2 Bottom Metal includes updates based on customer feedback. It’s a great addition to any factory Tikka T3 or T3x!
THIS is a product we are very excited to offer! Jason wanted to launch the MOUNTAIN TACTICAL® with an OEM Bottom Metal and an AICS Long Action Bottom Metal. These parts were too complex to machine on our old 3 axis mill and too expensive to contract out. So now, four years later, we have the technology! The OEM Bottom will be the first bottom metal introduced with the Long Action AICS Bottom Metal following shortly. If you’ve been following us on Facebook, you’ve seen the progression and we custom build fixtures for our new 4 axis mill.
The purpose of the Tikka T3 OEM replacement bottom metal is to get rid of another piece of plastic on the rifle that is prone to flexing which causes some of Tikka’s magazines to get stuck in the mag well.
The Trigger Guard has been enlarged making it safer to shoot the rifle with gloves. Additionally, we widened the trigger guard a little to enhance the safety of the rifle by making it more difficult to accidentally discharge the rifle while eliminating some sympathetic muscle movement upon trigger pull.
No gunsmithing is necessary for installing and it is compatible with all models of Tikka T3 EXCEPT the latest generation of CTR which uses the TRG22 magazine system.
So throw away another plastic part and install a safer and more rigid bottom metal in its place.
Proudly made in Montana!
Material – 6061 Aerospace Grade Aluminum
Finish – Type III Mil-Spec Hard Anodized Black
Weight – 2.2 ounces