President's Day Sale

Sitewide » Feb. 15-16

VIEW OUR SPECIALS
>  Shop > 

Tikka T3/T3x Gen2 Performance Series OEM Bottom Metal- BLEMISHED

Tikka T3/T3x Gen2 Performance Series OEM Bottom Metal- BLEMISHED

$90.00

Check Our Dealers » https://tikkaperformance.com/dealers/

Buy on our new site »

Check Our Dealers » https://tikkaperformance.com/dealers/

Description

 

 

Things keep getting better and better!  Our Gen2 Bottom Metal includes updates based on customer feedback.  It’s a great addition to any factory Tikka T3 or T3x!

THIS is a product we are very excited to offer!  Jason wanted to launch the MOUNTAIN TACTICAL® with an OEM Bottom Metal and an AICS Long Action Bottom Metal.  These parts were too complex to machine on our old 3 axis mill and too expensive to contract out.  So now, four years later, we have the technology!  The OEM Bottom will be the first bottom metal introduced with the Long Action AICS Bottom Metal following shortly.  If you’ve been following us on Facebook, you’ve seen the progression and we custom build fixtures for our new 4 axis mill.

The purpose of the Tikka T3 OEM replacement bottom metal is to get rid of another piece of plastic on the rifle that is prone to flexing which causes some of Tikka’s magazines to get stuck in the mag well.  

The Trigger Guard has been enlarged making it safer to shoot the rifle with gloves.  Additionally, we widened the trigger guard a little to enhance the safety of the rifle by making it more difficult to accidentally discharge the rifle while eliminiating some sympathetic muscle movement upon trigger pull.

No gunsmithing is necessary for installing and it is compatible with all models of Tikka T3 EXCEPT the latest generation of CTR which uses the TRG22 magazine system.

So throw away another plastic part and install a safer and more rigid bottom metal in its place.

Proudly Made in Montana!

Specifications:

Material – 6061 Areospace Grade Aluminum

Finish – Type III Mil-Spec Hard Anodized Black

Weight – 2.2 ounces

Additional information

Weight 0.18749999983465 lbs

13 reviews for Tikka T3/T3x Gen2 Performance Series OEM Bottom Metal- BLEMISHED

  1. Ericbc7

    just installed the oem bottom metal on my Sporter 6.5×55 and it looks great. The edges are a bit sharp and the square back to the trigger guard may hit your fingers on high recoil, but the metal makes consistent torque easy. the plastic oem bottom clearly flexed when i torqued the screws down, this one does not.[IMG]http://i65.tinypic.com/24m55hy.jpg[/IMG][IMG]http://i67.tinypic.com/2mecqh0.jpg[/IMG]

    before and after

  2. Dog Down

    Great addition to my 300wsm hunting rifle. Huge improvement over the factory plastic.
    Well worth the investment, excellent CNC work and the finish is perfect.
    I received the updated version with the relieved edges,…Well done MT.
    Will purchase more in the future for my other rifles.

  3. Dave Ratliff (verified owner)

    Finally a lightweight SOLID piece of metal to replace the junk that comes with the Tikka. Problem is not only that the factory plastic piece will flex. The other problem is that the skimpy washer involved has very little grip area and no support. In my experience Tikka’s shoot best when torqued down, but in doing so you WILL eventually bend the washer rendering the bottom plastic useless. Bought 2 and solved 2 problems !!

  4. Timothy W. Knight (verified owner)

    I have just received and installed bottom metal on my Tikka T3 .300wm.It is absolutely beautiful,and fit wonderfully! Thank you Mountain Tactical.

  5. Neil Sullivan (verified owner)

    I would like to thank everyone at Mountain Tactical for superior customer service and exceptional quality product. I recently purchased the Tikka bottom metal and bolt shroud and am extremely impressed with the quality fit and finish. While researching after-market parts for my Tikka rifle, I came upon various companies that sold similar items. I chose to go with Mountain Tactical and am glad I did.

    The customer service is awesome. With my purchase confirmation I was informed that the recoil lug was waiting for a production run and that it was not available to ship at that time. I inquired of customer service and asked for an estimated time when it would be ready and I received a timely response as to when they would ship. Overall, I am extremely satisfied with Mountain Tactical.

  6. Gary B.

    Got it, installed it, looks great and fits perfectly!

  7. Dennis O’Dell (verified owner)

    Ordered replacement bottom metal earlier this year. The fit to rifle was perfect. The OEM magazine would not release without difficulty. I contacted Mountain Tactical about problem. They immediately sent a replacement with corrections and it works perfectly. These folks are awesome to deal with. I recommend them without hesitation!

  8. Ken (verified owner)

    These bottom metal units are awesome! I have two lefty T3’s (300 Win. Mag. and 280 AI). Both are set in McMillan Sako Hunter stocks. With the McMillan stock, the action can be torqued much tighter than with the factory stock, but the weak point is the factory plastic. Either it would get damaged, crack, or flex, which jammed the magazine well. No problems with these! I can torque them down very tight, and the mags still insert and release flawlessly. A huge improvement which actually is another easy step to make a custom gun out of a factory Tikka

  9. Bernard Reed (verified owner)

    This part dropped in perfectly in my T3 and T3x Boyd’s Pro Varmint Laminated stocks. And it eliminated having to use a small washer to prevent crushing of the soft wood fibers which in turn would cause magazine jamming upon higher torquing of the action screws. I was able to go up from 35 in-lbs to 40 in-lbs without jamming of the mag. Will probably cinch it down a bit more later if the need arises. Pricey but a nice part.

  10. Jeffery (verified owner)

    Wow, this is a most welcome upgrade, and even better than expected. The part totally transforms my already great Tikka T3 Tactical. It provides a more solid feel to the rifle, seems a bit more accurate, and the magazines click in much better and remove much easier. I’ve done every possible mod on my T3 Tactical, and this is the icing on the cake. The rifle "feels" solid now.

  11. Jeffery T. (verified owner)

    Wow, this is a most welcome upgrade, and even better than expected. The part totally transforms my already great Tikka T3 Tactical. It provides a more solid feel to the rifle, seems a bit more accurate, and the magazines click in much better and remove much easier. I’ve done every possible mod on my T3 Tactical, and this is the icing on the cake. The rifle "feels" solid now.

  12. Joseph (verified owner)

    PERFECT fit on my Tikka T3 Lite .30-06.
    One more (big) piece of flexible plastic gone!
    Thanks Mountain Tactical Team!

  13. Kevin (verified owner)

    Next to the bolt shroud, this is the best upgrade I feel you can do for your Tikka. I love this bottom metal. As others have mentioned it’s a must if you use a rigid stock like a McMillan.

Only logged in customers who have purchased this product may leave a review.

Questions and answers of the customers

    As a blemished part, what is a common defect?
  1. 0 votes
    Q As a blemished part, what is a common defect? answer now
    Asked by Steve on January 2, 2022 12:43 pm
    Answered by the admin

    Hello,

    It is only cosmetic. All blem's are fully functional.

    Thank you,

    The Mountain Tactical Team

Send me a notification for each new answer.

Company

Mountain Tactical Company logo Tikka T3x Accessories
MOUNTAIN TACTICAL® exists to carry tradition and inspire innovation by providing precision products to the everyday shooter.

Policy

ShippingInternational ShippingReturnsTerms & Conditions
Privacy Policy
Cookie Policy
Tikka T3x Rifles. Copyright © 2020 MOUNTAIN TACTICAL® COMPANY. All rights reserved.
cartphone-handsetmap-markerclockmagnifierchevron-down linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram