President's Day Sale

Sitewide » Feb. 15-16

VIEW OUR SPECIALS
>  Shop > 

Tikka T3/T3x Gen2 Long Action AICS Bottom Metal

Tikka T3/T3x Gen2 Long Action AICS Bottom Metal

$199.99

Buy on our new site »

Check Our Dealers » https://tikkaperformance.com/dealers/

Description

Patent Pending

Professional Gunsmith Installation Recommended

Our Gen2 Long Action AICS Bottom Metal takes the successful Long Action AICS Conversion Kit from MOUNTAIN TACTICAL® and incorporates upgrades from customer feedback.

We added a full magazine well to improve magazine retention and to speed up magazine changes.  The mag catch has been improved to prevent premature mag release under heavy recoil.  Our Gen2 CTR AICS conversion kit has a new, textured barricade stop that we added to the Gen2 Long Action AICS Bottom Metal as well.

The Tikka T3 and T3x has changed the firearm industry’s
perception of a what a precision hunting rifle should be world-wide.  While the Tikka excels in almost every aspect
a shooter could ask for in a rifle, one shortcoming hand loaders have struggled
with since the rifle’s inception is the limited magazine length.

A logical magazine replacement would be the long action AICS
magazines and clones.  While several
bottom metal companies have attempted to make a bottom metal compatible with
both these magazines and the T3/T3x, none have been able to create a solution
that actually allows the use of longer case lengths… until now…

This bottom metal has been 6 years in the making!  Through these years of trial and error, our
design team has been able to create a kit that allows the shooter to utilize
the full length available in these military grade magazines.

Standard COAL for long action AICS magazines is 3.60”

It is important to only use SAAMI length AICS style
magazines with an external length of no more than 3.715”

It is important to remember that once a rifle is modified
beyond the scope its original design, additional and unforeseen work may be
necessary for reliable function.  Thus,
installation, final fit and finish is best accomplished by a competent
gunsmith.

Magazine Compatibility:

AICS 300 Win Mag – compatible with belted magnums based on
the 300 Winchester Magnum

AICS 300 Win Mag – compatible with 30-06 and similar based
cartridges with modification to the magazine’s feed lips

AICS 338 Lapua – compatible with WSM and Nosler based
cartridges

Accurate Mag 30-06 – compatible with 30-06 and similar based
cartridges with modification to the magazine’s feed lips

Accurate Mag 300 Win Mag – compatible with belted magnums
based on the 300 Winchester Magnum

Accurate Mag 300 RUM and .375 H&H Mag – compatible with
WSM, Nosler, and other 404 Jeffries based cartridges

MagPul PMag 5 AC L, Standard – compatible with 30-06 and
similar based cartridges with modification to the magazine’s feed lips (outside
must be trimmed to fit into the Tikka action)

 

MagPul PMag 5 AC L, Magnum – compatible with belted magnums
based on the 300 Winchester Magnum with modification to the magazine’s feed
lips (outside must be trimmed to fit into the Tikka action)

Specifications:

Mag Catch Material – Stainless Steel

Mag Catch Finish – Mill Finish

Bottom Metal Body – 6061-T6 Billet Aluminum

Bottom Metal Finish – Type III Mil-Spec Hard Anodized

Bolt Stop Material – Stainless Steel

Additional information

Weight 0.30625 lbs
Dimensions 8 × 5 × 1.5 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Questions and answers of the customers

    Hi, I have the Tikka T3x varmint in l223. Is this available and do you ship to Canada.
  1. 0 votes
    Q Hi, I have the Tikka T3x varmint in l223. Is this available and do you ship to Canada. answer now
    Asked by Doug Kapounek on March 17, 2022 12:05 pm
    Answered by the admin

    Hello,

    We do ship to Canada. We are redesigning the LA AICS. They will be available in 1 to 2 months.

    Thank you,

    The Mountain Tactical Team

  2. Hi, I have a Tikka T3X Super Varmint in 300 WinMag. Will this fit without any mods needed on the stock? I do not want a part that needs professional fitting.
  3. 0 votes
    Q Hi, I have a Tikka T3X Super Varmint in 300 WinMag. Will this fit without any mods needed on the ...... Read more answer now
    Asked by Steve on March 3, 2022 7:34 am
    Answered by the admin

    Hello,

    The LA AICS will drop right in. It is the CTR AICS that needs gunsmithing.

    Thank you,

    The Mountain Tactical Team

  4. Are these available to buy? I can not find add to cart on the web site.
  5. 0 votes
    Q Are these available to buy? I can not find add to cart on the web site. answer now
    Asked by Rod Hamilton on March 1, 2022 5:41 am
    Answered by the admin

    Hello,

    At this time we only have a couple of blems left. We are in the process of redesigning them. Not sure when the new ones will be available. You can check for them on our distributors websites.

    Thank you,

    The Mountain Tactical Team

  6. hi. I have a t3x lite in a 7mm rem mag. I found a used crt stock and I'm wondering if there is any difference in the bottom metal from stock to stock before ordering
  7. 0 votes
    Q hi. I have a t3x lite in a 7mm rem mag. I found a used crt stock and I'm wondering if there is an...... Read more answer now
    Asked by blake on February 20, 2022 11:40 am
    Answered by the admin

    Hello,

    Our LA AICS bottom metal will drop into the OEM stock. 

    Thank you,

    The Mountain Tactical Team

  8. Will this setup work for rebarreling into a 300 RUM?
  9. 0 votes
    Q Will this setup work for rebarreling into a 300 RUM? answer now
    Asked by Phil Lewis on February 16, 2022 7:22 pm
    Answered by the admin

    Hello,

    It does not look like it would. You need a true magnum length action. 

    Thank you,

    The Mountain Tactical Team

  10. Hello, I have a tikka t3x ctr in 6.5 prc. Will this kit work? And what size of magazine would be needed Thanks!
  11. 0 votes
    Q Hello, I have a tikka t3x ctr in 6.5 prc. Will this kit work? And what size of magazine would be ...... Read more answer now
    Asked by Brady on January 27, 2022 9:19 pm
    Answered by the admin

    Hello,

    Yes, we recommend going long action for the 6.5 prc because of case size. When it comes to AICS mags, that is up to you. Not sure what your COAL is.

    Thank you,

    The Mountain Tactical Team

  12. Hi, I ordered your Tikka T3/T3x Gen2 Long Action AICS Bottom Metal via Brownells since they are the only shop I found, offering your products in Germany. On my T3x Varmint in 300WM, using your bottom and ACCURATE MAG Long Action AICS Magazine 300 Winchester Magnum 3.715" aics mags, the cartridges do not feed, but tip below the bolt face when the bullet touches the feed ramp. Can you help me out or is this a general problem. The following products are being used (Part-Number ist Brownells-part-number): 100061485 LONG ACTION MOUNTAIN TACTICAL T3/T3x LA AICS Bottom Metal 100008956 5RD ACCURATE MAG Long Action AICS Magazine 300 Winchester Magnum 3.715" Thanx in advance, Danny
  13. 0 votes
    Q Hi, I ordered your Tikka T3/T3x Gen2 Long Action AICS Bottom Metal via Brownells since they ar...... Read more answer now
    Asked by Danny on December 29, 2021 12:11 pm
    Answered by the admin

    Hello,

    It is either the torque settings are not correct or if it is an after-market stock it does not have the 3 degree slope.

    Thank you,

    The Mountain Tactical Team

  14. Will this fit a veil wildland 6.5prc
  15. 0 votes
    Q Will this fit a veil wildland 6.5prc answer now
    Asked by Kevin on December 6, 2021 8:43 pm
    Answered by the admin

    Hello,

    The 6.5 PRC is considered a short action caliber. The CTR AICS is what you want. The inlet must have material removed by a gunsmith for it to seat proplery inside the stock.

    Thank you,

    The Mountain Tactical Team

  16. On my T3x in 300WM, using your bottom and magpul aics mags, why do the cartridges not feed, but tip below the bolt face when the bullet touches the feed ramp?
  17. 0 votes
    Q On my T3x in 300WM, using your bottom and magpul aics mags, why do the cartridges not feed, but t...... Read more answer now
    Asked by Mike on December 3, 2021 10:24 pm
    Answered by the admin

    Hello,

    Give me a call at 406-595-1970 and I will get you in touch with our tech specialist. We will get this taken care of.

    Thank you,

    The Mountain Tactical Team

  18. I just ordered one of these for my .300 Win Mag. What length AICS Magazine should I order?
  19. 0 votes
    Q I just ordered one of these for my .300 Win Mag. What length AICS Magazine should I order? answer now
    Asked by Andrew Robertson on November 30, 2021 3:37 pm
    Answered by the admin

    Hello,

    I do not understand your question. Can you clarify?

    Thank you,

    The Mountain Tactical Team

  20. I have a T3X Hunter in .300 Win Mag, with the factory wood stock. Will this bottom metal fit directly, or will I need to have my stock inletted?
  21. 0 votes
    Q I have a T3X Hunter in .300 Win Mag, with the factory wood stock. Will this bottom metal fit dire...... Read more answer now
    Asked by Drew on November 30, 2021 2:09 pm
    Answered by the admin

    Hello,

    With it being a long action, the long action AICS will fit right in. It is the CTR that needs inletting done.

    Thank you,

    The Mountain Tactical Team

  22. Hi, do any export-restrictions apply to the tikka-t3-t3x-g2-long-action-aics-bottom-metal (.300 winmag for ctr-chassis, right?) or can you ship to germany without any problems? Thanx + kind regards, Danny
  23. 0 votes
    Q Hi, do any export-restrictions apply to the tikka-t3-t3x-g2-long-action-aics-bottom-metal (.300...... Read more answer now
    Asked by Daniel Forst on October 27, 2021 1:10 am
    Answered by the admin

    Hello,

    We have no issues with shipping to Germany.

    Thank you,

    The Mountain Tactical Team

  24. I have a New T3X 300 Win, my loads are coming in with COAL of 3.55, I would like to keep the magazine length at or very close to the bottom of the trigger guard. Using your bottom metal what magazine would you recommend?
  25. 0 votes
    Q I have a New T3X 300 Win, my loads are coming in with COAL of 3.55, I would like to keep the maga...... Read more answer now
    Asked by George Rost on September 5, 2021 9:49 am
    Answered by the admin

    Hello,

    I would recommend any metal AICS mag...not a polymer one.

    Thank you,

    The Mountain Tactical Team

  26. hello i buy dis buttom metal, whats AICS magazine compagnie your recommend ?
  27. 0 votes
    Q hello i buy dis buttom metal, whats AICS magazine compagnie your recommend ? answer now
    Asked by eric boucher on May 21, 2021 2:13 pm
    Answered by the admin

    Hello,

    We recommend any of the metal AICS mags out there.

    Thank you,

    The MOUNTAIN TACTICAL® Team

  28. Doing a 28 Nosler conversion on a T3x long action, what bottom metal do you recommend? Do you have anything with a magazine that fits a little closer to flush... or at least even with the trigger guard? Will need to have a COAL of 3.5 or better at least, want to run 195 Berger’s
  29. 0 votes
    Q Doing a 28 Nosler conversion on a T3x long action, what bottom metal do you recommend? Do you hav...... Read more answer now
    Asked by Matt on May 19, 2021 9:56 am
    Answered by the admin

    Hello,

    Our LA mags only have a COAL of 3.4. You can go with our AICS bottom metal with an AICS mag.

    Thank you,

    The MOUNTAIN TACTICAL® Team

  30. For my T3x, I I bought the MagPul PMag 5 AC L, Standard for use with 30-06. Can you provide some more detail on: “modification to the magazine’s feed lips (outside must be trimmed to fit into the Tikka action)” The round is failing to ramp up into the action to chamber. And this mag is all composite, so there is nothing really to bend or adjust. Perhaps a diagram or pointing me to a video would be great.
  31. 0 votes
    Q For my T3x, I I bought the MagPul PMag 5 AC L, Standard for use with 30-06. Can you provide some ...... Read more answer now
    Asked by Eric on April 18, 2021 8:01 am
    Answered by the admin

    Hello.

    Go to YubeTube and search for composite mag modification for AICS bottom metals.

    Thank you,

    The MOUNTAIN TACTICAL® Team

  32. Is the Gen2 Long Action AICS Bottom Metal for a CTR or OEM stock inlet?
  33. 0 votes
    Q Is the Gen2 Long Action AICS Bottom Metal for a CTR or OEM stock inlet? answer now
    Asked by Kyle on March 3, 2021 2:14 pm
    Answered by the admin

    Hello,

    It is for a CTR inlet. If you have an OEM inlet you can have material removed by a gunsmith and it will fit just fine.

    Thank you,

    The MOUNTAIN TACTICAL® Team

  34. Hello, do you have this in Short action for 308? Or will this fit? And how much would you need to modify the rifle to operate.
  35. 0 votes
    Q Hello, do you have this in Short action for 308? Or will this fit? And how much would you need to...... Read more answer now
    Asked by William on January 8, 2021 8:08 am
    Answered by the admin

    Hello,

    We do make short action AICS bottom metals. If you do not have a CTR chassis you will need to have a gunsmith remove material from stock to accommodate.

    Thank you,

    The MOUNTAIN TACTICAL® Team

  36. hello i have tikka T3X 300WM, i put Grs bifrost stock. your Tikka T3/T3x Gen2 Long Action AICS Bottom Metal is drop fit on original systeme
  37. 0 votes
    Q hello i have tikka T3X 300WM, i put Grs bifrost stock. your Tikka T3/T3x Gen2 Long Action AICS Bo...... Read more answer now
    Asked by Eric Boucher on December 30, 2020 5:42 pm
    Answered by the admin

    Hello,

    If your stock is cut for CTR than yes it will drop right in.

    Thank you,

    The MOUNTAIN TACTICAL® Team

  38. will one of you normal long action bolt stop work with this or do I need the xl bolt stop for my 7mm when using the aics mags ?
  39. 0 votes
    Q will one of you normal long action bolt stop work with this or do I need the xl bolt stop for my ...... Read more answer now
    Asked by Darcey on November 3, 2020 9:20 pm
    Answered by the admin

    Hello,

    If you contact us directly we can special order you one for the XL bolt stop. We will be producing them next week. They are normally not for sale on our website.

    Thank you for the inquiry.

    The MOUNTAIN TACTICAL® Team

    Answered by the admin

    Hello,

    Yes you will need the XL bolt stop for that which does come with our kit.

    Thank you,

    The MOUNTAIN TACTICAL® Team

Send me a notification for each new answer.

Company

Mountain Tactical Company logo Tikka T3x Accessories
MOUNTAIN TACTICAL® exists to carry tradition and inspire innovation by providing precision products to the everyday shooter.

Policy

ShippingInternational ShippingReturnsTerms & Conditions
Privacy Policy
Cookie Policy
Tikka T3x Rifles. Copyright © 2020 MOUNTAIN TACTICAL® COMPANY. All rights reserved.
cartphone-handsetmap-markerclockmagnifierchevron-down linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram