Tikka Trigger Spring



While reverse engineering the Tikka trigger assembly in hopes to manufacture an aftermarket trigger that exceeded the factory trigger’s crisp, clean break, we realized that the only modification that was necessary could be done by replacing the trigger spring. 

This upgrade will provide a consistent 12 ounce to 24 ounce trigger pull while maintaining the factory trigger’s safety.

Mountain Tactical trigger springs are zinc plated for corrosion protection to provide a lifetime of service.

Installation is straight forward. 

Please note that whenever a modification to a trigger is done, a drop test must be performed to ensure the rifle system will not fire when bumped.  Refer to the installation video for instructions on performing this test.



Spring Material – Zinc Plated Steel

Q & A (18)

I have a Tikka model 695.
What upgrades do you have that will work with this Model?
Want to customize and upgrade the gun.
1. Trigger spring vs. Entirely new trigger?
2.Aftermarket firing pin and spring to reduce lock time?
3. Factory stock or custom replacement?
The gun shoots! This can be improved with a few tweaks.
Look forward to your response.
Thank you.
( David Brown, 11/11/2018 )

Hello David,

We specialize in aftermarket parts for the Tikka T3/T3x models.

However our Performance Series bolt shrouds and Elite Series action screws and Elite Series hardened action screws work on the M695.

Thanks for your inquiry!

MT Team

Does the Tikka trigger spring fit the newer T3X models?
( Richard, 26/09/2018 )

Hello Richard,

The trigger spring will work with T3/T3x models.

Thanks for your inquiry!

MT Team

Can these tikka trigger springs be sent to the UK
If they can what would be the price inc p&p
( Terry Stallard , 17/09/2018 )

Hello Terry,

Yes, we can ship trigger springs internationally for a flat international shipping fee of $14.99.

Thanks for your inquiry!

MT Team

Does the tikka t3 performance series picatinny rail (regular or blemished) hang over the reciever? The picture looks too long for my application. Is it possible to get a length measurement?
Thank you
( Daphne Witmer, 10/09/2018 )

Hello Daphne,

Our Gen2 Performance Series Picatinny rail in (regular or blemished) is receiver length and does not hang over the receiver.

It is 6 3/4" long and 3/8" thick.

Thanks for your inquiry!

MT Team

I just purchased 2 Tikka T3 Forest rifles and would like to put a scope rail on them. Do you make any for these rifles that don’t hang over the barrel? Thanks ( Peter hauer, 03/09/2018 )

Hello Peter,

The Tikka T3/T3x Gen 2 Performance Series Picatinny Rail is only Receiver length and does not hang over.

Thanks for your inquiry!

MT Team

Ask a question

Note: HTML is not translated!

Reviews (2)

Write a review

Please login or register to review