Tikka T3/T3x Stage 1 Performance Kit

$149.99 $192.00

Available Options


We are now offering our Performance Kit, which includes an Elite Series Recoil Lug, Performance Bolt Shroud, a Performance Series Picatinny Rail, and a Limbsaver recoil pad for $149.00! These items are normally priced at $192.00!

Sales are subject to new sales and existing inventory, and may sell out at any time.

Mountain Tactical Gen2 Performance Series Bolt Shroud

The finest Tikka T3 Bolt Shroud on the market today received a facelift.  We've seen bolt dimensions change slightly in last year, and have decided to redisign our bolt shroud to have a more snug fit. We're also changed the aesthetics on it for a new generation. 

The development team was tasked with creating not only a more durable bolt shroud than the plastic factory part, but to also add a level of increased precision that would allow the firearm to perform better than it does with the plastic shroud. 

Mass was increased over three fold to give the firing pin assembly a more solid platform to operate from.

The outside diameter was matched to the inside diameter of the bolt race creating perfect alignment of the bolt to enhance concentricity of the cartridge to the chamber.  In essence, the benefit is the same as having a three lug bolt to insure alignment to the axis of the bore.

All this and a profound aesthetic enhancement as well.

Like all Mountain Tactical products, this Tikka T3 Bolt Shroud carries a lifetime warranty to ensure a lifetime of good service.

Proudly Made in Montana!


  • Material – 6061-T6 Billet Aluminum
  • Finish – Type III Mil-Spec Hard Anodized
  • Weight - .7 ounces

Mountain Tactical Gen2 Performance Series Picatinny Rail

The Tikka Performance Center is excited to offer our Performance Series picatinny rails for the Tikka T3 available in both 0 and 20 MOA.

The primary advantage of the Performance Series picatinny rail system is our proprietary utilization of Tikka's recoil recess in the action.  This recoil lug absorbs the shearing forces of the mount under recoil instead of the four tiny screws included in most other mounting systems.

These rails are full, MIL-STD 1913 spec rails machined to an amazing +/- .002" tolerance.  Machined from one piece of 6061 aluminum and MIL-STD Type 3 anodizing, these rails will give you a lifetime of service.  Type 3 anodizing creates a hardened coating with a Rockwell Hardness value between 60 and 70.  (Click here to learn more about MIL-STD Type 3 Anodizing)

Unlike standard Weaver style rail mounts with limited contact with the scope rings, our full picatinny rails make contact with the scope rings over the entire width of the mount.  This eliminates potential damage that can occur under heavy recoil (see picture of a T3 Standard Rail damaged by the recoil of a .270).

The Tikka Performance Center Performance Series rails for the Tikka T3 are the finest aluminum Tikka T3 mounts you will find anywhere.

Limbsaver Gen2 AirTech Recoil Pad

Custom Prefit Pads are easily installed after removal of existing stock pad. These recoil pads offer innovative recoil reduction technology that absorbs recoil and vibration through a unique three step process using a proprietary material NAVCOM. The superior Limbsaver recoil reduction system allows greater access to the shooting sports. May require minor fitting on some models. Mounting screws not included. Choosing the right recoil pad can prove quite difficult considering there are a number of choices when it comes to style, size color and texture.

Q & A (60)

I have a tiki ctr in 6.5 Cree, do you have a 20moa rail for it? What about bolt handles? ( Brad brown, 05/03/2018 )

Hello Brad,

For inventory inquiries, please contact the shop directly at info@tikkashooters.com or 406-285-2371 M-Thurs 8:30-2:30 pm.

Thanks for your inquiry!        

MT Team


I have a Tikka T3 in 270 WSM. Will your new bottom metal fit on my rifle since it is a short action ? ( Ray. mosely, 01/02/2018 )

Hi Ray,

Our OEM bottom metal is a direct replacement for the factory bottom metal and fits all Tikka T3/T3x's but not the CTR.

Thanks for your inquiry!

MT Team

I have a T3 lite that I bought new 10 years ago. Will the bolt shroud, that you note is as Gen2, work on my bolt? You also note that the bolt dimentions had been changed about a year ago and you made adjustments for a snug fit. Just want to make sure it will fit. Dave ( Dave Pearson, 28/01/2018 )

Hi Dave,

Our products will fit your rifle just fine.

Thanks for your inquiry!

MT Team

Will your 20 moa rail fit on the T3A1 Tactical model with the folding stock and does it come with the screws?
( Randall E. Murphree, 28/11/2017 )

Hello Randall,

The 20 MOA rail will fit the receiver on a Tac-A1 rifle, but it will not match up with the fore end rail. There will be a gap and of course the 20MOA rail has a cant to it to achieve the 20 MOA of elevation. People with your rifle have left the rifle alone, and achieved the 20 MOA by using a 20MOA one piece scope mount. These are available from many manufacturers. You are then achieving the 20MOA with the mount and not the rail.

Thanks for the inquiry!

The MT Team

Do you also offer a metal bottom metal for a T3X .270 win? If so...what is the price please? ( Charles Williams, 13/10/2017 )

Hello Charles,

The T3 and T3X both can use our long action bottom metal for the 30-06 family of cartridges. Follow the link below:


Thanks for the inquiry!

Mountain Tactical

Ask a question

Note: HTML is not translated!

Reviews (2)

Write a review

Please login or register to review