Hi, Jason McHann here from MOUNTAIN TACTICAL®, and we have been on a quest for a solution to the $150 CTR mags that are sold out everywhere. Let me show you what we’ve got. Alright, so there’s nothing wrong with the CTR magazine other than they’re expensive. $150 for a magazine and you’re — I mean, the availability is the biggest issue. You can use TRG 22 magazines, they’re the same price, they just have a metal base plate instead of a plastic one, and they’re difficult to find as well.
So, what’s the solution? We created an AICS compatible, bottom metal, that’s a drop-in peace for the CTR. No modifications are needed to the rifle. [00:01:00] If you have an aftermarket stock that’s inlet for a CTR, this is going to work. We put a barricade stop in the front.
So, if you’re shooting competition or resting your rifle on the magazine, you can have feet issues. This gives you a nice support for your rifle system. We even did a nice ergonomic mag release. Most of the other AICS conversion kits on the market just have a flat bar. We wanted something that was a little more tactile, a little easier to function, and just didn’t want a sharp edge on the rifle. So, here is the most expensive AICS magazine you can buy at $80. There are also AICS clones all the way down to $35. Like I said, this one’s $80 and the most expensive one, then you can just be shooting, move forward, it releases.
So, let’s give you an idea of how this works. [00:02:00] Alright, so let’s go over what we did here. We wanted to make sure that the magwell will really hold the mag in place. So, we have side supports on the magwell. We wanted to make sure we had a barricade stop in the front so that way, you know, if you’re shooting, you’re using a barricade, and you’re not changing the angle the magazine in the action, so you have more reliable feeding. We also doubled all the edges inside the magwell. So that way, if your mag’s dirty or cold, if you’re doing a fast mag change, you can get into that magwell as quickly as possible. We also added a ramp in the front; again, just to make those mag changes smooth and effective.
You notice we don’t have just the standard bar with sharp edges on it for the mag release. This is a nice curve [00:03:00] to match the curvature of your finger, mag release. This is made out of austenitic stainless steel, so it’s phenomenally corrosion resistant, and it is going to stand the test of time on here. Larger trigger guard, so that way if you’re shooting with gloves, you can get in there on the trigger without any issues whatsoever. Then all of these surfaces here are filleted, they’re beveled so that way, there’s no sharp edge. So, under recoil, under a compromised shooting position, if you had your finger up against there, you’re not going to hit a sharp edge on your fingers. So, let’s go into how this functions.
Alright, so load make ready is just like any other magazine fed rifle. I have our modified P mag. We’re locked in. I’m on target. Now, let’s say I’m empty and I’m in a competition. [00:04:00] You have a flat bottom here, so you can slide this forward. The ramps make it real easy to do a blind mag change, feed a round and I’m still on target.
So, I know one of the first questions we’re going to get is which AICS magazines are compatible with our bottom metal. The answer is all of them are compatible with the bottom metal. The thing is, some of them you have to modify to make compatible with the Tikka action.
So, your standard AICS mag, accurate mags, any of the metal magazines alpha mags – the feed lips are nice and narrow and they go right into the action. So, you can see this junction here. The feed lips need to actually go inside the action for proper feeding. So, pretty much all the metal mags out on the market are going to be just fine.
For polymer mags – [00:05:00] let’s say you’re converting a 223 to AICS. This is the AICS 223 mag. See, you can’t get that mag all the way in there. So, what you need to do is you need to remove some material on the outside of the feed lips to make sure that the magazine can go all the way up into the action. Same is true with the Magpul, AICS magazines. These are phenomenal magazines. You just remove some of that material from the side of the feed lips so you can make sure that, that magazine will go all the way up. You can see it almost goes all the way up, but it just needs a little bit more material removed from the side of the feed lips right here.
If you want a polymer mag – this is just a dropped-in fit. The MDT mags work phenomenally well. Gino over there actually designed the MDT mags around the Tikka Action. They already have narrower feed lips, so it just works right out of the box. So, if you want something that works out box [00:06:00] either the MDT or one of the metal AICS variants. If you are willing to put a little bit of work into it, the Magpul works phenomenally well. You’re just going to have to take a Dremel or a file or some sandpaper and remove some material until that mag will see all the way into the action.
If you have any questions, as always, give us a holler, tikkaperformance.com and happy shooting everybody.