You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 406-595-1970
We are open: Office Hours M-F 8:30am - 4:30pm MDT
$ USD
  • Your shopping cart is empty!

Tikka Trigger Spring


$9.99

While reverse engineering the Tikka trigger assembly in hopes to manufacture an aftermarket trigger that exceeded the factory trigger’s crisp, clean break, we realized that the only modification that was necessary could be done by replacing the trigger spring. 

This upgrade will provide a consistent 12 ounce to 24 ounce trigger pull while maintaining the factory trigger’s safety.

Mountain Tactical trigger springs are zinc plated for corrosion protection to provide a lifetime of service.

Installation is straight forward. 

Please note that whenever a modification to a trigger is done, a drop test must be performed to ensure the rifle system will not fire when bumped.  Refer to the installation video for instructions on performing this test.

 

Specifications:

Spring Material – Zinc Plated Steel

Write a review

Please login or register to review
Would this work for my Tikka m595 243win? Thank you ( Dru Blanchard, 15/08/2020 )

Hi Dru,

Short answer: yes.  Other of our products that fit the M595/M695 are trigger springs, bolt handles, bolt shrouds, and both kinds of our action screws.

Hope this helps!

MT Team

will this spring also work in the Sako 85 to adjust the trigger pull to a more acceptable 1.5 - 2.0 pounds? ( Will T, 09/08/2020 )

Hi Will,

The Mountain Tactical trigger springs were designed for the Tikka T3/T3X and the Tikka T1/X. We cannot recommend that it would fit the Sako 85.  Unless you know that it fits, then don't try it. It might fit, but it might also be too loose, and we wouldn't want any accident to happen! So we want to err on the side of caution on this one. We would not try it. Best to get the ones specifically meant for the Sako 85.

Hope this helps!

MT Team

Hello my question is will this spring fit and work in a tikka t1x 22lr
Regards R Goodman
( Richard Goodman, 13/07/2020 )

Hello Richard,

Yes, our springs fit and are compatible with both the Tikka T1x and the Tikka T3/T3X.

Thanks for your inquiry!

MT Team

i am interesteed in the tikka trigger spring. How much would it cost sending it to Germany? ( Rainer Plein, 09/07/2020 )

Hi Rainer,

We have a flat rate of $14.99 USD for all international orders.

Thanks for your inquiry!

MT Team

Hi! I'm interested on a trigger spring for my tikka T3. How much would it cost sending it to Spain? Is there any posibility I pay for the spring and you send me the caracteristics (stiffness, length, number of turns...) so I can buy a similar spring in my country?

Thank you in advance.

José.
( Jose, 02/05/2020 )

Hello Jose,


We charge a flat $14.99 international shipping fee and don't give out the product dimensions.


Thanks for your inquiry!

MT Team

Will this spring work in my Tikka TAC A1 in 6.5CM? ( Grant Donley, 14/03/2020 )

Hi Grant, 

Yes, this spring will work for your TAC-A1! 

Thank you for your inquiry.

Mountain Tactical Team

Ask a question

Note: HTML is not translated!