You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 406-595-1970
We are open: Office Hours M-F 8:30am - 4:30pm MDT
$ USD
  • Your shopping cart is empty!

Tikka T1x Gen2 Picatinny Rail


$49.99

Available Options


The T1x is finally out in the wild and Tikka Shooters are clamoring to get their hands on them.  Once in hand they find out that Tikka put the 11mm European standard rimfire dovetail on the action instead of the standard 16mm dovetail found on the T3 and T3x greatly limiting their scope mounting options.

Not to worry, we’ve got your back!

With the Mountain Tactical Company T1x picatinny rail, you can mount any picatinny or Weaver style scope rings to your rifle.  We even include the option to gain 20 or 30 MOA and, for the adventurous types, extend the mounting platform to a full 8.5 inches!

We include a generous cut out above the ejection port to ensure proper clearance of spent brass, weight reducing scallop, and a seamless connection between the mount the rifle. 

Your rifle is only as good as its weakest link.  Don’t let your optic mount be the limiting factor on your rifle. 

Grab a Mountain Tactical T1x scope mount today!

Like all Mountain Tactical Company products, these rails are proudly made in Montana, USA.  

As always, this mount is back by our Lifetime Warranty.

Specifications:

Body – 6061-T6 Billet Aluminum

Finish – Mil-Spec Hard Anodized


Write a review

Please login or register to review

Hi, why does the new version not have a cutout for the ejection port? Is it slim enough to not obstruct the port? ( Vic Ramos, 05/09/2020 )

Hi Vic,

We have found that customers would rather have the functionality of a full width rail so they can mount the rail anywhere they want. An ejection mounting affects where the rail can be mounted. It works just the same whether the cutout is there or not. The non cutout feature gives more room. We tried it, but most customers wanted it to not have a cutout. Nothing is obstructed with our current design.

Happy shooting!

MT Team

Hi guys,

I have already bought the 20 MOA receiver length and I'm very happy with it.
However I'm pushing my T1X at 450+ yards right now and need more elevation.

Have you any plan to release a receiver length 40MOA or even 50 MOA rail ? :) I would buy it on the spot and pretty sure some 22 long range enthousiast will love it too !
( Florian, 04/08/2020 )

Hi Florian,

At this time, we don't have plans for either of those, mostly due to the capacity of the rifle. Maybe ask Santa for a different model.....you can have more than one Tikka!

Happy shooting!

MT Team

Does the rail come with screws?
Thx
( Don Bull, 02/08/2020 )

Hi Don,

Great question!  Yes, the rails come with all the screws and the wrench you need to install it.

MT Team

Can I use my original t3x 0 moa rail on the t1x? ( Frank Crites, 05/06/2020 )

Hello Frank,

The direct answer is "no". The T1x rail does not accept a rail from the T3/T3x. You'd need to purchase one specific for that model.

Thanks for your inquiry!

MT Team

I have 1 or your rails, and have been enjoying it. Now I'm interested in the 30 MOA for the Tikka T1x in 22LR. The extended 30MOA mentions a cutout above the ejection port, but the picture looks to not have a cutout.
Does the rail have a cutout in your most recent version?
Thank you! Jeff (Kansas)
( Jeff Kough, 07/05/2020 )

Hi there Jeff,

Our original rails had the cutout and the most recent version does not.

Thanks for your inquiry!

MT Team

Hi, I purchased the Mountain Tactical Tikka T1X Gen2 Picatinny Rail (0 MOA) and I can't find any information on torque specs. Would you be able to advise on the amount of torque in lbs/inch to put on the rail screws?

Thank you much in advance for any feedback you can provide.

Yves Jalbert
yves.jalbert@gmail.com
( Yves Jalbert, 29/03/2020 )

Hello Yves,

Torque the Tikka T3/T3x picatinny rail to 25 inch pounds.

Thanks for your inquiry!

MT Team

Ask a question

Note: HTML is not translated!

Tags: tikka, t1x, tikka t1x